INDOOR AND OUTDOOR FLOOR GRAPHICS
- METAWALK Metamark ‘MetaWalk’ is a textured media designed for temporary, floor graphics, applied to either smooth, indoor floor surfaces in good condition, or indoor short pile carpet. MD-MW-R9 is a one-part system, which can withstand regular levels of foot traffic and has an anti-slip finish tested in accordance with BS 7976- 2:2002 certification (Slider 96) and UK Slip Resistance Guidelines, as well as tested to DIN 51130:2014, achieving an R9 rating. It is the responsibility of the installer to determine suitability and monitor any wear and tear. It gives a highly vibrant print image, retaining greater intensity of the colours, and has a high level of opacity. The self-adhesive 170 micron PVC film allows for clean, easy handling and is printable with Solvent, Eco Solvent, Latex and UV printers. Quickview
- METAGUARD FLOOR MetaGuard FloorArt is a textured floor overlaminate offering decor and promotional branding opportunities for short term indoor use. The 100 micron matt embossed film gives a durable protection to graphics, with easy to clean finish. This versatile product can also be applied to wall graphics, for a one product solution. MetaGuard FloorArt has an anti-slip finish tested in accordance with BS 7976-2:2002 certification (Slider 96) and UK Slip Resistance Guidelines, as well as being tested to DIN 51130:2014, achieving an R9 rating. The recommended matched media is Metamark MD3 or MDP-H. Suitable for use with Solvent, Eco Solvent and Latex prints. Quickview
- TRIMARK MAK FLOOR INDOOR & OUTDOOR APPLICATIONS for floor graphics, stairs, private streets and wet floors. Outdoor applications suitable for max. 3/6 months. Suitable for cold or heating system applications; designed to be printed directly. Certified R13 anti-slippery. Mak Floor is self-extinguishing. Printing and cutting advice: Always print the material with high plotter head. If possible, cut the material with a flat bed cutting system or a milling cutter. If it is necessary to use a roll to roll system, both print&cut and cut only, it is recommended to keep the first and last pinch roller slightly inside the material. Always on roll to roll systems it is recommended to check and clean, as often as possible, the grit rollers, as residue may accumulate. Quickview
Loading ...Load More ...